Oct 13, 2017
Phil Saxby
wrote
Hi I'm hoping you can give me some advice. I have two x230 pumps placed horizontally at opposite ends of the tank around 6 inches from the surface. I am running AA on both pumps. My query is whether this is the "correct" configuration for running the OCG programme, when I say "correct" I mean "as the manufacturer intended". I fully understand that placement and configuration depends on the required results but I am trying to set a baseline from which to adjust from and would like this to be the "manufacturer default".
In addition I would also like to know if the OCG programme can be set to run at a maximum velocity percentage. I believe it can by entering settings once OCG is selected and setting the percentage value. I have done this and set at 40% however the controller is still showing the pumps running at 80% at times.
Finally, if you have any recommendations for how I should setup the pumps please feel free to suggest.
For info the tank is an Evolution Aqua eaReef 1500, approx. 400 litre, approx. 5.5 foot long.
Many thanks!
Phil
In addition I would also like to know if the OCG programme can be set to run at a maximum velocity percentage. I believe it can by entering settings once OCG is selected and setting the percentage value. I have done this and set at 40% however the controller is still showing the pumps running at 80% at times.
Finally, if you have any recommendations for how I should setup the pumps please feel free to suggest.
For info the tank is an Evolution Aqua eaReef 1500, approx. 400 litre, approx. 5.5 foot long.
Many thanks!
Phil
Reply
1 Answer
Oct 14, 2017
Carlos
agent
wrote
You have reached the Maxspect Support page for the US distributor. We are not the manufacturers and legally we can only sell and support Maxspect products within the U.S. You will need to contact your local distributor for all support and replacement parts. For a list of all distributors, please head over to http://maxspect.com/index.php?option=com_content&view=article&id=98&Itemid=495&lang=en.