Mar 27, 2017
Bob Chien
wrote
Just got the Xf250 with new controller and tried to setup for the first time. I have tried to program the 24 hours cycle using 12 set points in auto mode. A couple of questions:
1. I was not able to dial to the precise % that I desired. For example, it goes from +20% to 30% or to -20%, never give me the option of 5% and 10%. Do I miss anything?
2. I am wondering if I can incorporate the feeding mode into the cycle in auto mode, say 18:00 - 18:15 is the duration for the feeding. How do I do that?
Thanks
1. I was not able to dial to the precise % that I desired. For example, it goes from +20% to 30% or to -20%, never give me the option of 5% and 10%. Do I miss anything?
2. I am wondering if I can incorporate the feeding mode into the cycle in auto mode, say 18:00 - 18:15 is the duration for the feeding. How do I do that?
Thanks
Reply
1 Answer
Mar 27, 2017
Carlos
agent
wrote
1. The controller does not allow you to go below 10%. It will go from 10% to -10%.
2. No, you have to manually engage the Feed mode by pressing and releasing the power button once.
2. No, you have to manually engage the Feed mode by pressing and releasing the power button once.