Dec 06, 2017
Cody
wrote
If I have pump A on pulse and put pump B on anti sync, will pump B pulse at the opposite time of pump A? What percentage does the pump drop to when it pulses?
Also after setting up the pump speed the instructions refer to the other variables but never fully names them. Are they just the pulse intervals?
Thanks!
Also after setting up the pump speed the instructions refer to the other variables but never fully names them. Are they just the pulse intervals?
Thanks!
Reply
5 Answers
Dec 06, 2017
Carlos
agent
wrote
Thank you for contacting us. Can you tell us, where are you located?
Yes, pump will do the opposite of pump A. The pumps drop to 10% when they are pulsing so be sure that you set the Max pulse speed to 20% or higher. Otherwise, you will have a pump running in constant speed all the time.
Technically all flow patters are different pulse patterns. The pump can only ramp up and down so each different pattern is a different flow.
Yes, pump will do the opposite of pump A. The pumps drop to 10% when they are pulsing so be sure that you set the Max pulse speed to 20% or higher. Otherwise, you will have a pump running in constant speed all the time.
Technically all flow patters are different pulse patterns. The pump can only ramp up and down so each different pattern is a different flow.
Dec 06, 2017
Cody
wrote
I'm in the US (Idaho). Thank you. I figured that was the case but wanted to make sure.
Are the other variables the pulse duration?
Are the other variables the pulse duration?
Dec 06, 2017
Carlos
agent
wrote
No, all available variables are only displayed based on the flow mode you are selecting. If they are not available on the flow mode you selected, you wont see the variables.
Dec 06, 2017
Cody
wrote
By other variables I meant the arrows pointing to the top and bottom right corners and they have an S by them. I assumed the S stood for seconds.
Dec 06, 2017
Carlos
agent
wrote
Correct. If you are running in Pulsing mode, then reverse speed wont be an option. So the controller is smart enough to only show you what it is capable of changing based on the flow pattern you have chosen.