Reef Octopus NW-110-6520B Output Valve

Aug 25, 2014

Frank Cattafi wrote

I took apart my Reef Octopus NW-110-6520B Skimmer Output valve and I couldnt remember how it went back together so I tried many ways and it will not work correctly my bubbles are terrible is the a diagam or a blue print to put it back together or should i buy a new one? Also how mant millimeters is the one I have for the NW-110-6520B skimmer?

14 Answers

Aug 25, 2014

Carlos agent wrote

Do you want the INT or the SS?

The output on the 110INT is 40mm.

Aug 25, 2014

Frank Cattafi wrote

I do not uderstand int or SS?

Aug 25, 2014

Carlos agent wrote

INT for internal and SS for Sump Saver. Both in sump skimmers but the INT has the pump on the side while the SS usually has the pump inside the skimmer.

Aug 25, 2014

Frank Cattafi wrote

Is there a diagram of how the output valve goes together?

Aug 25, 2014

Frank Cattafi wrote

My Pump is on the outside of the skimmer, Thank You For such a quick response!!!! So I guess its a SS.

IMG_1017.JPG

Aug 25, 2014

Carlos agent wrote

This may be better. Here is a video on how to assemble your skimmer.

https://www.youtube.com/watch?v=l2lt0Fvovwk&list=PLd9ddZo6L-mlzYo3Zt1jHkLj0Z2SuzT5L

Aug 25, 2014

Frank Cattafi wrote

Hi Unfortunitly it didnt show me the assembly of the Output Valve, Can you please help with that?

Aug 25, 2014

Frank Cattafi wrote

Do you have a diagram or the output valve? to take it apart and clean it and to reasemble it? I took a picture of it That is the peice I took apart.

IMG_1019.JPG

Aug 25, 2014

Carlos agent wrote

There is no diagram for the valve. You literally just screw the plunger in and place the cap. Test it by turning the nob to the right to tighten it and drop the plunger and to the left to open and lift the plunger.

Aug 25, 2014

Frank Cattafi wrote

There a was a thick washer in there I cant figure out how it goes heres a picture of it i goes in the valve.

IMG_1020.JPG