English pipe thread adaptors for the HY-3000 Bubble Blaster

Aug 26, 2014

David Williams wrote

Can I buy the following two adaptors for a HY-3000 Bubble Blaster pump?:
Intake - 1/2" female English pipe thread
Output - 1" female English pipe thread

Also, I am retrofitting an outdated venturi skimmer by removing the old water pump and venturi valve. It's currently all 1/2" but I am going to replace the return (from the pump to the skimmer) with about 12" of 1" flex pipe without any elbows. Will the micro bubbles consolidate considerably in the foot of 1" pipe before entering the skimmer body?

Thank you for your help with this.

3 Answers

Aug 26, 2014

Carlos agent wrote

Here is a link to all metric parts available...

http://www.coralvue.com/parts/plumbing-parts-aquariums/metric-parts

Unsure about the micro bubbles because we have never tried what you are doing. You will need to test and see.

Aug 26, 2014

David Williams wrote

Thank you Carlos. Does the HY-3000 pump come with thread adapters? If so, what size? I don't need anything in metric but thought the pump was in metric. Do you sell an intake adapter to 1/2" thread and/or a output adapter to 1" thread?

I will test and see on the micro bubbles and move the pump up if necessary.

Thanks again!

Aug 27, 2014

Carlos agent wrote

No threaded adapters. The pump only comes with the threaded intake and outflow adapters (both outside threaded) volute plus the pump itself.