Regal 170 INT pump issue

Avatar image
Mar 20, 2017
Chuck Vestal wrote
I turned off the pump to clean the skimmer pump. I could not get the pump to engage and took it apart and cleaned it. When I power up the controller the green lights come on for about 4 seconds and it seems the pump is trying to start, but will not. Any ideas for a fix?

Thank you in advance for any guidance,
Reply
8 Answers
Avatar image
Mar 20, 2017
Carlos agent wrote
How old is the pump and when was the last time you gave it a good cleaning (water/vinegar soaking)?
Avatar image
Mar 20, 2017
Chuck Vestal wrote
Thanks for the super fast reply.

The pump gets a good annual cleaning and is approximately 3 years old. It is soaking in vinegar solution since this morning.
Avatar image
Mar 20, 2017
Carlos agent wrote
Give that a try. Otherwise, the issue may be a bad impeller. Hard to know 100% unless you send the pump in for paid inspection and repair.
Avatar image
Mar 20, 2017
Chuck Vestal wrote
What would it cost for the inspection? I see that this.Model has been retired on your site. Do you still sell the pump only? If so, what would it cost....

Avatar image
Mar 20, 2017
Carlos agent wrote
The replacement pump would be $299.99 with free shipping. The new pump would come with a 2-year warranty and the new pump is also Apex compatible.

http://www.coralvue.com/varios-4s-controllable-skimmer-pump
Avatar image
Mar 20, 2017
Chuck Vestal wrote
How much would it be for the inspection of the original?

On the new pump do you have a "frequent flyer" discount? I have purchased five Maxspect Razors and two 150 Gyres from you in addition to the Skimmer mentioned here.

Thank you,
Chuck
Avatar image
Mar 20, 2017
Carlos agent wrote
Please submit a private ticket so we can get more details about your pump.
Avatar image
Mar 21, 2017
Chuck Vestal wrote
Good morning Carlos,

The pump seems to be working properly after yesterday's vinegar bath.

Thanks for the quick replies.
Chuck