Mar 11, 2017
william rogowski
wrote
I have a new 200 series controller, are there adjustments for the display brightness on the controller? The indicator light for auto mode and set up mode are nice and bright. However, I cannot see anything else in the display. I cannot see what the unit is doing and more importantly cannot make programming changes.
Also upon disassembly I noticed the ceramic shaft that the rotor slides on appears to have a flat side on it. I didn't see any flat spots on the bushings, so does the flat spot on the shaft have to line up with another flat on the bushing or does the rotor just slide on in any position?
Also upon disassembly I noticed the ceramic shaft that the rotor slides on appears to have a flat side on it. I didn't see any flat spots on the bushings, so does the flat spot on the shaft have to line up with another flat on the bushing or does the rotor just slide on in any position?
Reply
3 Answers
Mar 13, 2017
Carlos
agent
wrote
Unfortunately you cannot change the brightness of the controller. If you are having issues with the controller, please start a private ticket and one of the reps will be able to get personal information and get you a replacement part.
Mar 13, 2017
william rogowski
wrote
thanks
what about the ceramic shaft alignment into the bushings?
what about the ceramic shaft alignment into the bushings?
Mar 13, 2017
Carlos
agent
wrote
There is a flat side on the bushings... Otherwise the propeller bushings would not be able to grip the shaft and will slip. The flat side is only on the inner half of the bushing and not all the way through.