Jan 05, 2017
lindersen
wrote
I have a xf230 controller with my 2 xf150 pumps. the auto 24h revers mode the pumps don't antisymc revers and only put products against each other. also I set the power to 20% but if when they go to alternating mode they push 50% making a sand storm.
I seen that maybe I need to update firmware. where can I find it?
I seen that maybe I need to update firmware. where can I find it?
Reply
14 Answers
Jan 06, 2017
Carlos
agent
wrote
You cannot run the XF150 pumps with an XF230 controller. They have different sized connection cables so you would not be able to connect them together.
Jan 06, 2017
lindersen
wrote
Sorry XF250 i ment.
Jan 06, 2017
Carlos
agent
wrote
Where are you located?
Jan 06, 2017
lindersen
wrote
Sweden.
Jan 06, 2017
Carlos
agent
wrote
You have reached the US distributor and legally we can only sell and support Maxspect products within the U.S. You will need to contact your local distributor for all support and replacement parts. For a list of all distributors, please head over to http://maxspect.com/index.php?option=com_content&view=article&id=98&Itemid=495&lang=en.
Jan 06, 2017
lindersen
wrote
Okay understand. But firmware is well the same?
Jan 06, 2017
Carlos
agent
wrote
Most likely but cannot really say because you are not within our territory. It is best to contact your distributor.
Jan 08, 2017
lindersen
wrote
Can you tell me how to reset the kontroller? That must be the same as EU ;)
Jan 08, 2017
lindersen
wrote
Plus there is no for sweden?
Jan 09, 2017
lindersen
wrote
I downloaded the one you posted on another link and all is working great now.
Only thing i dont understand is when choosing one of the 24H programs is askes: Preferens: ON/OFF
Dont understand what this funktion does. Only thing i can se is ON it shows a half moon and OFF it shows the time. Maybe this is a question you can help with :)
Only thing i dont understand is when choosing one of the 24H programs is askes: Preferens: ON/OFF
Dont understand what this funktion does. Only thing i can se is ON it shows a half moon and OFF it shows the time. Maybe this is a question you can help with :)
Jan 09, 2017
Carlos
agent
wrote
Please direct all support questions to your local distributor. They are the ones that will help you with any programming issues or problems you may have.
Jan 09, 2017
lindersen
wrote
Carlos there is no local in sweden. I would understand if i had a broken stuff but above is a simple question that you as the supplier should be able to answear. Or do i need to tell everyone in europe to stay away from you product?
Jan 09, 2017
Carlos
agent
wrote
We are not the manufacturers. We are only the distributors here in the US. You are free to contact Maxspect directly for any support since there is no distributor in your country. You can contact them directly here... http://maxspect.com/index.php?option=com_fss&view=main&Itemid=494&lang=en
Jan 09, 2017
lindersen
wrote
Okay then i missunderstod.