May 20, 2016
Michael principe
wrote
My brand new reef octopus water level keeps rising out of the skimmer. How do I stop it and even it up.
Reply
8 Answers
May 21, 2016
Jeremy Rykiel
agent
wrote
Are you referring to water rising in the reaction chamber and foaming into the cup or water level in the last chamber? Here is quick installation video demonstrating the proper assembly of the skimmer: https://www.youtube.com/watch?v=WoOlriA2Zec
May 22, 2016
Michael principe
wrote
I watched the videos several times and the skimmer is constructed right. It's still overflowing as soon as I plug it in. Is there any other reason this is happening.
May 23, 2016
Carlos
agent
wrote
Is it overflowing because the skimmer is producing too much foam that the foam rapidly rises up the neck and into the cup turning into clear water?
May 23, 2016
Michael principe
wrote
Rapidly rises up the neck
May 23, 2016
Carlos
agent
wrote
There are several common reasons a protein skimmer will overflow but the most common is a chemical within the water itself.
Chemical Reaction - Some chemicals react with the air that the skimmer produces and causes the skimmer to over produce foamate. Chemicals known to cause skimmers to overflow are, red slime remover, medications, reef/frag putties (epoxy Putty) frag glues, water conditioners, dechlorinators, stress coat, NEW filter socks, newly mixed salt, bacteria (seeding) additives as well as other dosing medias. In order to remove these chemicals from the water column we suggest that you do several 20% water changes over the period of a month and add a good amount of fresh activated carbon to the system and change out every week till the skimmer has returned to normal operation.
Water level in sump - It is important that you place your skimmer in the proper water level. It is also important that the output of the skimmer is not submerged under water unless it is properly vented.
Inner water level - If your inner water level is set too high the slightest change in your water chemistry can cause your skimmer to over flow. We suggest that your inner water level to be set at no higher than the collar where the cup meets the body.
Blockage - The air intake otherwise known as the venturi, is like small vacuum pulling air from the surrounding environment. Often collecting dust and debris from the air which can block the proper amount of air to enter the pump increasing the water being pulled by the pump. It is also common for saltcreap to build up in the venturi and will need to be removed manually by scraping it away or dissolving in a solution of vinegar and water. Make sure you inspect the air venture, silencer and air hose for any debris or salt creep deposits. Also be sure the air hose is not bent or too long preventing proper air flow into the pump.
Chemical Reaction - Some chemicals react with the air that the skimmer produces and causes the skimmer to over produce foamate. Chemicals known to cause skimmers to overflow are, red slime remover, medications, reef/frag putties (epoxy Putty) frag glues, water conditioners, dechlorinators, stress coat, NEW filter socks, newly mixed salt, bacteria (seeding) additives as well as other dosing medias. In order to remove these chemicals from the water column we suggest that you do several 20% water changes over the period of a month and add a good amount of fresh activated carbon to the system and change out every week till the skimmer has returned to normal operation.
Water level in sump - It is important that you place your skimmer in the proper water level. It is also important that the output of the skimmer is not submerged under water unless it is properly vented.
Inner water level - If your inner water level is set too high the slightest change in your water chemistry can cause your skimmer to over flow. We suggest that your inner water level to be set at no higher than the collar where the cup meets the body.
Blockage - The air intake otherwise known as the venturi, is like small vacuum pulling air from the surrounding environment. Often collecting dust and debris from the air which can block the proper amount of air to enter the pump increasing the water being pulled by the pump. It is also common for saltcreap to build up in the venturi and will need to be removed manually by scraping it away or dissolving in a solution of vinegar and water. Make sure you inspect the air venture, silencer and air hose for any debris or salt creep deposits. Also be sure the air hose is not bent or too long preventing proper air flow into the pump.
May 23, 2016
Michael principe
wrote
I think it's the chemicals cause I've put medicines in my tank and water conditioners but I read that this would happen. I have a 55 gallon tankard I've taken out 35gallons so far hoping it would fix itself
May 23, 2016
Michael principe
wrote
What would I do if it started to overflow from bubbles
May 23, 2016
Carlos
agent
wrote
In order to remove these chemicals from the water column we suggest that you do several 20% water changes over the period of a month and add a good amount of fresh activated carbon to the system and change out every week till the skimmer has returned to normal operation.