Feb 03, 2017
robert
wrote
Purchased a rodc 5500s pump for my diablo xs200 skimmer(as recommended by website). What adaptor is required to attach the pump to the skimmmer? I've ordered the xs200 - psk1000-rodc3500 adaptor but it seems it is the same adaptor as the original psk100-rodc connector.
Reply
3 Answers
Feb 03, 2017
Carlos
agent
wrote
Hmmm, our website recommends the RODC3500S or VarioS-4S as the replacement pump for an XS200 skimmer.
If you have that, you would need the following adapter... http://www.coralvue.com/rodc-pump-output-adapter
If you have that, you would need the following adapter... http://www.coralvue.com/rodc-pump-output-adapter
Feb 03, 2017
robert
wrote
You are correct sir, seems I miss read. But can you specify exact part number for compatibility. Xs200 to rodc 5500 because it only lists 3500 attachment. Placed several calls with no answer.
Feb 03, 2017
Carlos
agent
wrote
The adapter you will need is the last option. Select the XS200 adapter. Make sure that you are using the RODC3500S or VarioS-4S pump. The RODC5500/VarioS-6S pump will not work. The output is too big.