Jan 12, 2014
Nathan Whetzel
wrote
I have a Maxspect razor nano, I have the moonlights set to come on at 21:00 at 1% B channel 0% A channel to 6:30 also same settings,but around 23:30 its up to 3% B channel 0% A channel is this normal?
Thanks. Nate
Thanks. Nate
Reply
2 Answers
Jan 13, 2014
Chris Conti
agent
wrote
Sounds like you have a programming issue. Please send me your program and I'll check for errors.
Let me elaborate further on the design of the time points.
The controller will automatically calculate the intensity of the channels based on the two closet TP's, for example, if you set the channels to run at 50% at 8:00am and 80% at 10:00am, then somewhere at 9:00am the channels would be at 65% (because 65% is midway between 50% and 80% and 9:00am is midway between 8:00am and 10:00am).
Likewise if you want the fixture to remain at a certain intensity, say 100% during noon hours, then you must set two time points at the same intensity so it will not change. So you'll need to set the intensity to 100% at two time points, 12:00pm and 4:30pm respectively.
The percentages will always be moving up and down depending on the program, this is how we gradually achieve the dusk to dawn effect. The Razor will never jump from one time point to another.
Chris
Let me elaborate further on the design of the time points.
The controller will automatically calculate the intensity of the channels based on the two closet TP's, for example, if you set the channels to run at 50% at 8:00am and 80% at 10:00am, then somewhere at 9:00am the channels would be at 65% (because 65% is midway between 50% and 80% and 9:00am is midway between 8:00am and 10:00am).
Likewise if you want the fixture to remain at a certain intensity, say 100% during noon hours, then you must set two time points at the same intensity so it will not change. So you'll need to set the intensity to 100% at two time points, 12:00pm and 4:30pm respectively.
The percentages will always be moving up and down depending on the program, this is how we gradually achieve the dusk to dawn effect. The Razor will never jump from one time point to another.
Chris
Jan 13, 2014
Nathan Whetzel
wrote
I just cheched it my B setting was at 10% at 6:30 . I guess when I glanced it looked like 1%. Thank You for your time. Nate.