Dec 11, 2013
HigherLevel
wrote
I am building a new 125 gal system with refuge sump and currently I got the following equipment,
Protein Skimmer -NWB150 CLASSIC PROTEIN SKIMMER
2 Media reactor - MF 1000 ADVANCED MEDIA REACTOR ( 1 for GFO and Other for Carbon)
Bio Pellet- BIOCHURN 120R BIOPELLET RECIRCULATING REACTOR
Calcium -CR140 6 INCH CALCIUM REACTOR
Now that being said I want to create a intake manifold for witch will draw water from the sump of course but a strong enough to pump the drive these units efficiently. Each unit will have separate ball values to control intake flow but going with this idea...Witch pump would u recommend?? Reason being I don't want to clutter the sump with each individual unit with its own supply pump. Any advice Please
Thanks in Advance
Protein Skimmer -NWB150 CLASSIC PROTEIN SKIMMER
2 Media reactor - MF 1000 ADVANCED MEDIA REACTOR ( 1 for GFO and Other for Carbon)
Bio Pellet- BIOCHURN 120R BIOPELLET RECIRCULATING REACTOR
Calcium -CR140 6 INCH CALCIUM REACTOR
Now that being said I want to create a intake manifold for witch will draw water from the sump of course but a strong enough to pump the drive these units efficiently. Each unit will have separate ball values to control intake flow but going with this idea...Witch pump would u recommend?? Reason being I don't want to clutter the sump with each individual unit with its own supply pump. Any advice Please
Thanks in Advance
Reply
2 Answers
Dec 12, 2013
Jeremy Rykiel
agent
wrote
You probably be safe with a water blaster 5000 or 7000 depending on your flow requirements of each of the reactors.
Dec 26, 2013
System
wrote
Your ticket has been closed and marked as resolved due to inactivity. If this is not the case, just reply to this email to reopen the ticket.