Dec 31, 2013
Julio Fernandez
wrote
I have an old NWB 150 skimmer with a Sicci pump which I purchased in 2009. It was the first cone shaped Reef octopus skimmer but it did not have the gate valve it had the tube for water level adjustment. I need a new pump and I believe the pump I need according to your website is the OTP-2000GT. Can you verify that's the correct pump. The P/N on my pump is worn off. Also I would like to modify the skimmer for the gate valve. I see you have P/N #ROP-Gate but do I need any other parts for the conversion. Thank you
Reply
1 Answer
Jan 03, 2014
Carlos
agent
wrote
Julio,
The NWB150 has always had the OTP pump. The replacement pump you would need to purchase is the following:
http://www.coralvue.com/reef-octopus-otp2000gt-skimmer-pump
Do you have pictures of the old pump that came with the skimmer?
In terms of the Gave Valve, you would need the 40mm one.
http://www.coralvue.com/reef-octopus-protein-skimmer-40mm-gate-valve
You will also need the following part - Diameter: 40mm | Length: 180mm - (unless you are willing to cut the one you currently have in which case, you won't need this part:
http://www.coralvue.com/reef-octopus-skimmer-output-a-pipe-521
Hope this helps,
Carlos Chacon
CoralVue
The NWB150 has always had the OTP pump. The replacement pump you would need to purchase is the following:
http://www.coralvue.com/reef-octopus-otp2000gt-skimmer-pump
Do you have pictures of the old pump that came with the skimmer?
In terms of the Gave Valve, you would need the 40mm one.
http://www.coralvue.com/reef-octopus-protein-skimmer-40mm-gate-valve
You will also need the following part - Diameter: 40mm | Length: 180mm - (unless you are willing to cut the one you currently have in which case, you won't need this part:
http://www.coralvue.com/reef-octopus-skimmer-output-a-pipe-521
Hope this helps,
Carlos Chacon
CoralVue