May 06, 2017
Toemas R
wrote
Thank you Carlos, for helping me get the firmware updated properly. I have a new 250 and an old 150. I have ran the pumps on every possible configuration since updating the firmware and the 150 simply is not performing anywhere near what it is supposed to.
I have linked a youtube video showing exactly what I mean. I have also done a full cleaning on the unit to see if there would be a change, nothing.
https://www.youtube.com/watch?v=D2_Ti4a92GY
I have linked a youtube video showing exactly what I mean. I have also done a full cleaning on the unit to see if there would be a change, nothing.
https://www.youtube.com/watch?v=D2_Ti4a92GY
Reply
1 Answer
May 08, 2017
Carlos
agent
wrote
Please remove the pump from the water and take a picture of the front of the pump. Make sure that I am able to read the maxspect logo. Also, zoom out just enough so I can see both sides of the pump AND use a flash so I am also able to see the inner propellers and the propeller blades.