Oct 18, 2017
Mark Fredericks
wrote
How do I switch manual and auto modes? I set manual to 50% constant flow, and it just says off after a few seconds
Reply
7 Answers
Oct 19, 2017
Jeremy Rykiel
agent
wrote
Press and hold the switch mode button till it changes.
Oct 19, 2017
Mark Fredericks
wrote
I was able to reset the unit and get it to operate in constant flow at 50%. It's set to run like that 24/7. Is there a way to program it to run say, 7am to 9pm? Also, are there any firmware updates?
Oct 19, 2017
Jeremy Rykiel
agent
wrote
Yes you can program your controller in automatic mode please see the following page and video for further information on programing the controller: http://blog.coralvue.com/icecap-3k-gyre-pump-assembly-installation-operation/
Here is the page to see what updates are available: http://blog.coralvue.com/icecap-3k-gyre-controller-firmware-updates/
Here is the page to see what updates are available: http://blog.coralvue.com/icecap-3k-gyre-controller-firmware-updates/
Oct 19, 2017
Mark Fredericks
wrote
Thank you for your help!
Oct 19, 2017
Jeremy Rykiel
agent
wrote
No problem.
Oct 27, 2017
Mark Fredericks
wrote
I was able to get the unit to work for a few days. Returned home from a business trip and the pump will not operate. Tried resetting and reprogramming the unit and it will not come on, it just says off after a few seconds.
Oct 27, 2017
Jeremy Rykiel
agent
wrote
Sorry to hear about the issues you are having please submit a support ticket at coralvue.com/support to get assistance from one of our techs.